Protect Your Car From Key Long and Relay Theft With a Ghost 2 Immobiliser
The innovative Ghost immobiliser will protect your car from key-long theft and relay theft. Your car won't start if someone doesn't know your PIN code.
Transport Mode allows you to temporarily disable the device, which is perfect for vehicle transportation and servicing. It can be activated again by entering another PIN code.
No Key Fobs or Led Indications
The Ghost 2 immobiliser is a innovation in automotive security technology that provides a strong defense against modern car theft techniques. Its invisibility and engine start-blocking reduces the risk of theft, providing peace of mind as well as saving money on insurance.
It cannot be detected by scanners, and it is not hacked using common methods such as key cloning or signal jamming. The device makes use of buttons on your vehicle, like those found on the steering wheel or door panels, to create an individual PIN code which can be changed. This sequence can be as long as 20 presses. Only the owner of the vehicle is allowed to start the engine when the right sequence or beacon or mobile app is used. This provides an extra layer of security against thieves.
what is ghost immobiliser can also enable an easy service mode in cases such as valet parking or servicing, which require you to temporarily disable your system. This can be accomplished quickly and easily via a mobile app, meaning your vehicle is secure while being worked on. It is simple to switch back to secure mode once the job is complete, ensuring your vehicle is fully protected at all times.
The Ghost 2 is far more user-friendly than other systems that require a fob. The app also functions as a spare key for emergencies, allowing you to drive your vehicle with the security turned off without entering your PIN code.
No Radio Frequency Signals
Unlike traditional security systems that have their own separate remote, the Ghost 2 immobiliser doesn't require any additional key fobs, and can be operated using the buttons on your steering wheel or the centre console. The device is unnoticeable by thieves who use the RF scanning technology or code grabbing, so your car won't start for them in the event that they take your key.
The device makes use of an unique password sequence of buttons to secure the engine. This personalised PIN code can be entered on the app or using the vehicle's existing buttons on the steering wheel and on the centre console. You can also lock the gearbox so that your car cannot be driven until you have your key or pin code. The device can be set to Transport mode, which allows you to drive the vehicle without having to enter your pin code. This will provide extra security for your vehicle when it is parked at a service or valet park.
The Ghost 2 immobiliser is designed to act as a deterrent to theft that is as discrete as possible, which makes it a desirable choice for those who've spent a lot of money on customising their vehicles or own expensive or rare vehicles. Many have stated that the device is an excellent option to stop their cars from being stolen. Many have told stories of attempted car thefts that were stopped by it. The Ghost 2 also offers a wide range of options, with customers reporting that it works with their regular keys for their cars as well as with the emergency button in their vehicle, which gives them peace of mind when they're away from their vehicle.
No Radio Frequency Scanners
Protect your vehicle from hacking, key cloning, and key theft by using the Ghost immobiliser. The system uses the buttons in your vehicle, for example those on your dashboard and steering wheel, to create a unique and programmable sequence of buttons that only you can identify. Without this sequence, your vehicle will not start. The combination of a distinct disarm sequence and the absence of radio frequency signals makes the device extremely difficult to hack or bypass.
The Ghost CAN Immobiliser is a safer alternative to Thatcham approved devices that rely on radio frequencies scanning. It works silently without external signals and doesn't rely on any external signals. It's a safer alternative and also offers insurance-approved status when installed by a TASSA approved installer (we're one of them! ).
Due to the nature that the Ghost immobiliser works with your vehicle, it is strongly recommended to have an expert installer complete the installation. This ensures that it is seamlessly integrated into your vehicle systems, resulting in optimal performance and a significantly reduced risk of failure.
Professional installation is usually with warranties and support to enhance the value of your purchase. This is a major protection against thieves who are less likely to attempt any attempts at bypassing the device because of its extensive security features and professional installation.
As well as being an effective deterrent to thieves As well as a great deterrent to thieves, the Ghost is designed to be user-friendly too. It can be set to automatically re-arm a certain amount of time after parking your car. This means you don't have to remember your PIN code every time. It also provides the flexibility of Service/Valet Mode when you have to hand your vehicle over for servicing or valet parking, which can be enabled or disabled according to your preferences using an easy indication sequence.
No Wire Cutting
The Ghost 2 is non-invasive and does not require any wire cutting during installation. It connects to the CAN data network of your vehicle and is programmable with a unique PIN. This prevents anyone else from starting the engine if they don't have a personalised sequence of PINs or app authorisation.
It is also unnoticeable by the sophisticated scanning tools which some thieves use and is silent because it doesn't emit radio signals like other immobilisers. It's weatherproof and sealed. so small it can be concealed anywhere inside the vehicle making it near impossible to locate.
Another advantage of the Ghost II is that it can be switched to 'transport mode' for short periods without the need for an individual PIN sequence. This is great for situations such as lending the car to a family or friend member or in a situation of emergency. You can start your car quickly and safely.
It is important to work in a well lit space when installing the Ghost II. You should also wear safety gear while working with electrical components and tools. A basic set will allow you make precise connections. A multimeter can help verify electrical values, and make sure that your wiring is secure. Insulation tape and cable ties can also be used to protect or join any exposed or cut wires during the installation process.
It is essential to disconnect the vehicle's battery before you begin any wiring work. This will prevent any airbag deployments and electrical shocks when the Ghost II is connected to the vehicle's electrical system while the battery is disconnected.
Easy to Install
The Ghost immobiliser is a distinctive next-generation device that works by connecting directly to the vehicle's CAN Data Network and using a personalised PIN Code to prevent your vehicle from getting started. This makes it much more difficult to crack than standard alarm systems or after market key fobs, and provides superior security against key cloning hacking and relay attacks.
The unit can be concealed in your vehicle, and it makes use of the buttons on your dashboard and steering wheel to create a unique sequence that you are the only one to know. This prevents thieves from being able make use of a duplicate key to start your vehicle. It also prevents them from using an instrument for diagnosing that is based on hacking the OBD.
Installation is simple and requires no cutting of wires. The unit is connected to the vehicle's CAN bus system via a constant 12V supply and an earth connection. A multimeter is required to identify the right wires. Basic hand tools will suffice for the installation. To protect the connections from damage, insulation tape or heat shrink tubes are recommended. Cable ties can also be used to keep the wiring tidy.
After installation, the device goes into a learning mode and records your individual sequences and buttons to create your unique pin code. This information is stored in the CAN network, making it nearly impossible for anyone else to duplicate your sequence and start your vehicle.
Transport Mode is a feature that can be utilized in the event of an emergency, such as if you forget your PIN code, decide to sell your vehicle or a button becomes inoperative. This will turn off the Ghost System completely, however it will be activated automatically whenever you exceed 31mph for more than 15 minutes or enter your PIN Code. This is ideal for those who rent their cars regularly through services such as Turo or ZipCar.