How to Install a Ghost Immobiliser
A ghost immobiliser can be a powerful deterrent for car thieves. Combining this device with other security equipment and remaining vigilant will help you build an effective defense against modern, tech savvy thieves.
A ghost immobiliser will protect your vehicle from hotwiring, key cloning and relay car theft by the needing a pin number to start the engine. It works by using buttons that are already present on your center console or steering wheel, so it's undetectable to criminals.
Identifying the Wires
With increasing numbers of vehicles being taken away without the owner's key, it is vital to safeguard your vehicle. While thieves might be able to clone your key fob or even take the vehicle by hacking its system, a ghost immobiliser adds an additional layer of security by blocking all signals coming from the key fob and making it impossible to start your vehicle without entering a PIN code.
You can install the ghost immobiliser on your own, but it is better to have a professional handle the job. A professional technician will know where to install the device and how to connect it to the wiring of your vehicle. Installation can be complicated and it is essential that all connections are done correctly to avoid damage or malfunctions.
To get the best results, you must be in a well-lit space and wear the appropriate safety gear. Also, you should read the user manual to familiarise yourself the wiring system. This will enable you to identify the wires that are required for installation and ensure that you have the right equipment and components.
Once the wiring has been connected, you can connect your battery and test to determine if the system is working properly. To avoid electrical issues, you should also ensure that the battery terminals are secure. It is also important to label the CAN L and CAN H wires with labels or tape so that you are capable of keeping track of them throughout the installation process.
The Ghost Immobiliser allows you to put your vehicle in Transport Mode when you need someone else to drive it for a short period of time such as for valet parking or when the vehicle requires to be serviced. This lets you input the code via the service button that is located on the steering wheel, center console or door panels and then it will enter the PIN code change mode.
Some thieves attempt to bypass ghost immobilisers by using jamming or spoofing devices that block or send fake messages to the system. This can be avoided by investing in anti-jamming devices and regularly monitoring your Ghost immobiliser to detect signs that it has been tampered with.
Disconnecting the Battery
The ghost immobiliser is a cutting-edge security gadget designed to stop car theft. It makes use of cutting-edge technology to detect and deactivate the engine when the correct PIN code is entered, thus stopping the vehicle from being taken away by thieves. The system is extremely efficient and discreet. It has no visible indicators that could discourage criminals. However, there might come an occasion when you have to remove the unit for maintenance or upgrades, or to sell your car.
This process requires specialized tools and expertise as you'll be working with wires and removing certain factory components. It is important to follow the step-by- step instructions that are provided by the manufacturer. It is also a good idea to seek advice from an experienced mechanic or auto electrician particularly if you're not familiar with working on automobiles.
After identifying the wires and disconnecting them, it is important to examine the condition of your battery. Ensure that it is clean and free of any corrosion, and that the connections are secure. If necessary, think about replacing the battery to ensure it is able to handle the electrical demands of a security system that is aftermarket.
After you have disconnected the wiring you can take off the ghost immobiliser . Utilize wire cutters or strippers to remove the wires, taking care not to harm the wires or their terminals. Label each wire to make it easier to reconnect them in the future. If the wires have been connected using a heat-resistant tool to break the connection. It is also essential to insulate the cut wires with insulation tape or shrink tubing to keep them from short circuits.

Connect the wires using the constant 12V power source. Use a fuse tap if necessary to protect the connections with fuse. Connect the grounding wire to an adequate grounding on the vehicle's chassis.
After reconnecting the wires, start your vehicle and enter the PIN code. Then, try to start the engine once more. If it doesn't start then the ghost immobiliser has been successfully removed.
Making Connections
Ghost immobilisers are an affordable solution to increase the security and safety of your vehicle. It works by connecting to your car's CAN bus system, capturing signals and preventing the engine from starting unless the correct PIN code is entered. This device is virtually impossible to bypass. It's a great choice for those who need extra security and peace of mind. It can help lower your insurance premiums when used in conjunction with the Thatcham Approved Tracking System.
Reviewing and obtaining the wiring diagram of your car model is crucial in the process of installing. The diagram serves as a roadmap for locating the wires needed to create precise connections. Using the proper wiring connectors or soldering methods will ensure that the connection is long-lasting and secure.
The wires that connect the Ghost immobiliser to the CAN bus must be correctly identified and connected. Use small labels or tape to identify the CAN L and CAN H wires. This will avoid confusion during installation. The location of these wires will be different for every vehicle, which is why it is essential to refer to the wiring diagram for your vehicle as well as online resources when identifying them.
Once the correct cables are connected after connecting the correct cables, power can be restored to the Ghost immobiliser. It is a good idea to test your immobiliser. Start the engine without entering the code. This will verify that the immobiliser has been installed correctly and is functioning as it should. It is recommended to check your immobiliser on a regular basis to help to identify any issues or problems early.
Another benefit of the ghost immobiliser is that it can be set up in just a few minutes and doesn't require any cutting or modifications to the wiring inside your vehicle. It is a fantastic option for those who want to increase the security of their vehicle, as it can work in conjunction with a Thatcham approved tracker or alarm that will notify you via your tablet or phone if the vehicle is compromised.
Mounting the Unit
The Ghost immobiliser works well as a deterrent to car thieves, particularly when combined with a GPS tracking device. The device uses existing buttons on the centre console, door panels, and the steering wheel to create a unique sequence that only you know to stop your vehicle from getting started. The device is also weatherproof and tamper-proof. It also comes with a three-year guarantee and is recommended by a variety of insurance companies.
During the process of installation it is important to follow the instructions carefully. If you're not sure about the installation, you should consult an expert. A multimeter and wire stripper are essential tools to identify the wiring and making precise connections. It's also an excellent idea to buy some insulation and electrical tape for protecting the connections from potential damage. It's a good idea to test your device after the installation is completed to make sure that everything works as it should.
Ghost immobilisers are an excellent method to protect your car particularly in areas with high crime rates. It stops key cloning, ECU swapping, and other security risks, and can be paired with an iPhone application for simple management and monitoring. It's a favorite choice for vehicle owners looking to protect their investment, and is simple to install.
The Ghost II immobiliser is designed with a slim, low-profile design that makes it unnoticeable by thieves. It connects to your vehicle's CAN (Controller Area Network) and blocks you from starting the engine without entering a pin code. The PIN code is generated using an unique sequence of buttons on the steering wheel, centre console or doors and can be changed at anytime. The device is also tamperproof and comes with a GPS tracker that can assist police find your car in the event of a car theft. It's an excellent option to safeguard your car from thieves, and it's Thatcham approved.